|
Products
Download
About FNet
|
FNet Crash&Reboot-Detailed Spec
|
|
FNet Crash&Reboot
Detailed Spec
|
|
Hardware
specification
| |
|
Reset
Output: 5V bilateral analogue switches (transmission gates), ON
resistance is typically 200 ohms. Reset system with a reset cable. |
| |
|
Output
Pulse Width: 6 msec minimum hold after system reset. |
| |
|
Interface:
32-bit 33 MHz PCI local bus, PCI V2.1 compliant. |
| |
|
IRQ:
available PCI IRZ, system BIOS/O assign. |
| |
|
Address:
256-byte I/O space. I/O base address continuously mapped
within 0000 to FFFF hex. |
| |
|
I/O
range by system BIOS/OS. |
| |
|
Timer
Clock: 33.3 MHz, derived from computer PCI clock. |
| |
|
Power
Requirement: supplied from system PCI slot. Typically 1.0W,
+3.3VDC
@300mA and
+5VDC
@ 10mA. |
| |
|
Size:
3.1” (80mm) long X 1.5” (38mm) high. |
Environment
| |
|
Operating
Temperature Range: 0 ℃ + 60 ℃ |
| |
|
Storage
Temperature Range: －50 ℃ to +120 ℃ |
| |
|
Humidity:
10% to 90 % RH, Non-condensing. |
|
|
|
|
FNet
Corporation Copyright ©
2006 FNet Inc. All Rights Reserved
|
|
|
